Figure 40: Local Authentication - SMC Networks E21011 User Manual

Figure 40: Local Authentication

The following items are displayed on Authentication page:
MAC Authentication — Selects between, disabled, Local MAC
authentication and RADIUS authentication.
Local MAC — The MAC address of the associating station is compared
◆
against the local database stored on the access point. The Local MAC
Authentication section enables the local database to be set up.
System Default — Specifies a default action for all unknown MAC
◆
addresses (that is, those not listed in the local MAC database).
Deny: Blocks access for all MAC addresses except those listed in
■
the local database as "Allow."
Allow: Permits access for all MAC addresses except those listed in
■
the local database as "Deny."
◆ MAC Authentication Settings — Enters specified MAC addresses and
permissions into the local MAC database.
MAC Address: Physical address of a client. Enter six pairs of
■
hexadecimal digits separated by hyphens; for example, 00-90-D1-
12-AB-89.
Permission: Select Allow to permit access or Deny to block access.
■
Add/Delete: Adds or deletes the specified MAC address and
■
permission setting into or from the local database.
– 83 –
| Wireless Settings
C 8
HAPTER
Authentication