Table 16: Radius Client Commands - SMC Networks E21011 User Manual

| RADIUS Client Commands
C 19
HAPTER
radius-server
address
radius-server port
E
XAMPLE
AP(config)# radius-server primary enable
This setting has not been effective !
If want to take effect, please execute make-radius-effective command !
AP(config)#
This command specifies the primary and secondary RADIUS server
address.
S
YNTAX
radius-server {primary | secondary} address <address>
address - IP address of server.
D S
EFAULT ETTING
10.7.16.96
C M
OMMAND ODE
Global Configuration
E
XAMPLE
AP(config)# radius-server primary address 192.168.1.9
This setting has not been effective !
If want to take effect, please execute make-radius-effective command !
AP(config)#
This command sets the RADIUS server network port.
S
YNTAX
radius-server {primary | secondary} port <port_number>
port_number - RADIUS server UDP port used for authentication
messages. (Range: 1024-65535)
D S
EFAULT ETTING
1812
C M
OMMAND ODE
Global Configuration
E
XAMPLE
AP(config)# radius-server primary port 1810
This setting has not been effective !
– 166 –