SMC Networks E21011 User Manual page 126

| System Management Commands
C 13
HAPTER
apmgmtui ssh port
apmgmtui telnet-
server enable
After boot up, the SSH server needs about two minutes to generate
◆
host encryption keys. The SSH server is disabled while the keys are
being generated. The show system command displays the status of
the SSH server.
E
XAMPLE
AP(config)# apmgmtui ssh enable
AP(config)#
This command sets the Secure Shell server port.
S
YNTAX
apmgmtui ssh port <port-number>
port-number - The UDP port used by the SSH server.
(Range: 1-65535)
D S
EFAULT ETTING
22
C M
OMMAND ODE
Global Configuration
E
XAMPLE
AP(config)# apmgmtui ssh port 1124
AP(config)#
This command enables the Telnet server. Use the no form to disable the
server.
S
YNTAX
apmgmtui telnet-server enable
no apmgmtui telnet-server
D S
EFAULT ETTING
Interface enabled
C M
OMMAND ODE
Global Configuration
E
XAMPLE
AP(config)# apmgmtui telnet-server enable
AP(config)#
– 126 –