Snmp-Server User - SMC Networks E21011 User Manual

D
None
C
Global Configuration
C
◆
◆
◆
◆
E
This command configures the SNMP v3 users that are allowed to manage

snmp-server user

the access point. Use the no form to delete an SNMP v3 user.
S
password for authentication and a DES key/password for
encryption.
read-view - The name of a defined SNMPv3 view for read access.
write-view - The name of a defined SNMPv3 view for write access.
S
EFAULT ETTING
M
OMMAND ODE
U
OMMAND SAGE
The access point allows multiple groups to be created.
A group sets the access policy for the assigned users.
When authentication is selected, the MD5 algorithm is used as specified
in the snmp-server user command.
When privacy is selected, the DES algorithm is used for data
encryption.
XAMPLE
AP(config)#snmp-server vacm group testgroup security-level authpriv rdview
wrview
AP(config)#
YNTAX
snmp-server user <username> <groupname> {none | md5 <auth-
passphrase>} {none | des <priv-passphrase>}
no snmp-server user <username> <groupname>
username - Name of the user connecting to the SNMP agent.
(Range: 1-32 characters)
groupname - Name of an SNMP group to which the user is assigned.
(Range: 1-32 characters)
none | md5 - Uses no authentication or MD5 authentication.
auth-passphrase - Authentication password. Enter a minimum of
eight characters for the user. (8 – 32 characters)
none | des - Uses SNMPv3 with no privacy, or with DES56
encryption.
priv-passphrase - Privacy password. Enter a minimum of eight
characters for the user. (8 – 32 characters)
– 155 –
| SNMP Commands
C 17
HAPTER