Table of Contents
Advertisement
S
C
YSTEM
ONFIGURATION
RTS Length (256-2346): Set the RTS (Request to Send) frame
length.
You may configure the access point to initiate an RTS frame
sequence always, never, or only on frames longer than a specified
length. If the packet size is smaller than the preset RTS threshold
size, the RTS/CTS mechanism will NOT be enabled
The access point sends request to send (RTS) frames to a particular
receiving station to negotiate the sending of a data frame. After
receiving an RTS, the station send a CTS (Clear to Send) frame to
acknowledge the right for the sending station to send data frames.
The access point contending for the medium may not be aware of
each other. The RTS/CTS mechanism can solve this "Hidden Node
Problem." (Default: 2346)
TCP / IP Settings
Set the TCP/IP configuration for accessing the Internet.
With DHCP Client "Enable," the IP address, subnet mask and
default gateway can be dynamically assigned to the Access Point
21
Advertisement
Table of Contents
