SMC Networks E21011 User Manual page 209

E
XAMPLE
AP(if-wireless 0)# rts-threshold 0
This setting has not been effective !
If want to take effect, please execute make-RF-setting-effective command !
AP(if-wireless 0)#
This command configures the service set identifier (SSID) of the VAP.
ssid
S
YNTAX
ssid <string>
D
EFAULT
vap_a0 to vap_a7 (for VAPs 0-7)
C
OMMAND
Interface Configuration (Wireless-VAP)
C
OMMAND
Clients that want to connect to the wireless network through an access
point must set their SSIDs to the same as that of the access point.
E
XAMPLE
AP(if-wireless 0: VAP[0])# ssid net-name
This setting has not been effective !
If want to take effect, please execute make-security-effective command !
AP(if-wireless 0: VAP[0])#
This command prohibits access to clients without a pre-configured SSID.
closed-system
Use the no form to disable this feature.
S
YNTAX
[no] closed-system
D
EFAULT
Disabled
C
OMMAND
Interface Configuration (Wireless-VAP)
string - The name of a basic service set supported by the access
point. (Range: 1 - 32 characters)
S
ETTING
M
ODE
U
SAGE
S
ETTING
M
ODE
– 209 –
| Wireless Interface Commands
C 26
HAPTER