Step; Figure 18: Quick Start - Step 3 - SMC Networks E21011 User Manual

| Initial Configuration
C 4
HAPTER
Quick Start
S 3
TEP
The Step 3 page of the Quick Start configures radio interface settings.

Figure 18: Quick Start - Step 3

The following items are displayed on this page:
I S
NTERFACE ETTING
WiFi Mode — Sets the mode of operation of the radio chip to
◆
802.11n/g (2.4 GHz) or 802.11n/a (5 GHz). (Default: 11n/g)
B S
ASIC ETTING
SSID — Sets the service set identifier for the primary VAP.
◆
(Default: vap_a0)
S
ECURITY
◆ Association Mode — Selects the security mode for association of
other access points and wireless devices to the access point. For more
information, see "Wireless Security Settings" on page
(Default: Open System; Range: Open System, WPA, WPA-PSK, WPA2,
WPA2-PSK, WPA-WPA2-mixed, or WPA-WPA2-PSK-mixed)
Encryption Mode — The available data encryption methods depend on
◆
the selected Association Mode. (Default: None)
None: Implements no encryption for Open System association.
■
WEP: WEP is used as the multicast encryption cipher. You should
■
select WEP only when both WPA and WEP clients are supported.
– 48 –
92.