SMC Networks E21011 User Manual page 164

| Flash/File Commands
C 18
HAPTER
show dual-image
characters for files on the access point. (Valid characters: A-Z, a-z, 0-9,
".", "-", "_")
Due to the size limit of the flash memory, the access point supports
◆
only two operation code files.
The system configuration file must be named "syscfg" in all copy
◆
commands.
E
XAMPLE
The following example shows how to upload the configuration settings to a
file on the TFTP server:
AP# copy config tftp syscfg 192.168.1.19
Backup Config to tftp was successful!!
AP#
The following example shows how to download a configuration file:
AP# copy tftp config syscfg 192.168.1.19
Restore Config from tftp was successful.
AP#
This command displays the name of the current operation code file that
booted the system and the file saved as a secondary image.
S
YNTAX
show dual image
C M
OMMAND ODE
Exec
E
XAMPLE
AP#show dual-image
Image Status
-----------------------------------------------
Image A (Active)
Image B (Backup)
AP#
– 164 –
Version
1.1.0.6
1.1.0.1