SMC Networks E21011 User Manual page 119

end
exit
cli-session-timeout
This command returns to the previous configuration mode.
D S
EFAULT ETTING
None
C M
OMMAND ODE
Global Configuration, Interface Configuration
E
XAMPLE
This example shows how to return to the Configuration mode from the
Interface Configuration mode:
AP(if-ethernet)#end
AP(config)#
This command returns to the Exec mode or exits the configuration
program.
D S
EFAULT ETTING
None
C M
OMMAND ODE
Any
E
XAMPLE
This example shows how to return to the Exec mode from the Interface
Configuration mode, and then quit the CLI session:
AP(if-ethernet)#exit
AP#exit
(none) login:
This command enables a timeout for console and Telnet sessions.
S
YNTAX
cli-session-timeout <enable | disable | value>
enable - Enables the timeout.
disable - Disables the timeout.
value - Sets a time for the timeout (Range: 60~3600 seconds).
D S
EFAULT ETTING
120 seconds
– 119 –
| General Commands
C 12
HAPTER