SMC Networks E21011 User Manual page 150

| SNMP Commands
C 17
HAPTER
snmp-server
location
snmp-server enable
server
C M
OMMAND ODE
Global Configuration
E
XAMPLE
AP(config)#snmp-server contact Paul
AP(config)#
R C
ELATED OMMANDS
snmp-server location
This command sets the system location string. Use the no form to remove
the location string.
S
YNTAX
snmp-server location <text>
no snmp-server location
text - String that describes the system location.
(Maximum length: 255 characters)
D S
EFAULT ETTING
None
C M
OMMAND ODE
Global Configuration
E
XAMPLE
AP(config)#snmp-server location WC-19
AP(config)#
R C
ELATED OMMANDS
snmp-server contact
This command enables SNMP management access and also enables this
device to send SNMP traps (i.e., notifications). Use the no form to disable
SNMP service and trap messages.
S
YNTAX
[no] snmp-server enable server
D S
EFAULT ETTING
Enabled
C M
OMMAND ODE
Global Configuration
– 150 –