Quit; System Management Commands; Table 4-7 System Management Commands - SMC Networks 6128PL2 - annexe 2 Management Manual

quit

This command exits the configuration program.
Default Setting
None
Command Mode
Normal Exec, Privileged Exec
Command Usage
The quit and exit commands can both exit the configuration program.
Example
This example shows how to quit a CLI session:
Console#quit
Press ENTER to start session
User Access Verification
Username:

System Management Commands

These commands are used to control system logs, passwords, user names, browser
configuration options, and display or configure a variety of other system information.
Command Group
Device Designation
Banner
User Access
IP Filter
Web Server
Telnet Server
Secure Shell
Event Logging
Time (System Clock)
System Status
Frame Size

Table 4-7 System Management Commands

Function
Configures information that uniquely identifies this switch
Configures administrative contact and device indentification and location
information
Configures the basic user names and passwords for management access
Configures IP addresses that are allowed management access
Enables management access via a web browser
Enables management access via Telnet
Provides secure replacement for Telnet
Controls logging of error messages
Sets the system clock automatically via NTP/SNTP server or manually
Displays system configuration, active managers, and version information
Enables support for jumbo frames
System Management Commands
4
Page
4-26
4-27
4-37
4-39
4-41
4-44
4-45
4-54
4-64
4-77
4-83
4-25