Table of Contents
Advertisement
Menu
Console Login
Configuration
TFTP Download
Changing the Network Configuration
Use the Network Configuration menu to set the bootup option,
configure the switch's Internet Protocol (IP) parameters, enable the
on-board Web agent, or to set the number of concurrent Telnet
sessions allowed. The screen shown below is described in the
following table.
<APPLY>
Use <TAB> or arrow keys to move. <Enter> to select.
Parameter
IP Configuration
IP Connectivity Test (Ping)
HTTP Configuration
MAX Number of Allowed
Telnet Sessions
Physical Address
U
SING THE
Description
Sets user names and passwords for system
access, as well as the invalid password
threshold and lockout time.
Downloads new version of firmware to
update your system (in-band).
Network Configuration
=====================
IP Configuration ...
IP Connectivity Test (Ping) ...
HTTP Configuration ...
MAX Number of allowed Telnet sessions (1 -4) : 4
Physical Address : 00-22-22-22-22-22
Description
Screen used to set the bootup option, or
configure the switch's IP parameters.
Screen used to test IP connectivity to a
specified device.
Screen used to enable the Web agent.
The maximum number of Telnet sessions
allowed to simultaneously access the agent
module.
Physical address of the agent module.
S
C
YSTEM
ONFIGURATION
<OK>
P
ROGRAM
<CANCEL>
2-11
Advertisement
Table of Contents
