Advertisement
A14228A
6.3.7. Geothermal HP (when available)
First touch SETUP, then touch Geo HP to set up the parameters for the
Geo HP unit.
A160188b
6.3.7.1. Freeze Limits
This setting controls the temperature level to which the loop liquid can
drop before the Geo HP unit will stop operating. See the Geo HP
Installation Instructions for more details. Typically, 26°F is chosen for
47
Advertisement
Need help?
Do you have a question about the bryant Evolution Connex Control SYSTXBBECC01-C and is the answer not in the manual?