Carrier bryant Evolution Connex Control SYSTXBBECC01-C Installation Instructions Manual page 32

• Humidity: Adjustable from -10 – 10%. Default = 0%
NOTE: For single-zone systems, the indoor temperature offset is on this
screen. For zoning systems, there is a separate zone indoor temperature
offset screen in the zoning menu.
6.3.1.4. Reset Factory Defaults
This option allows the installer to reset certain factory parameters. After
the selections are made, touch SAVE.
• Program Schedule: Reset back to pre-programmed time and
temperature.
• User Settings: Reset user settings back to pre-programmed values.
• Install Settings: Reset installation settings back to pre-programmed
values.
• Last 10 Events: Reset the last 10 system events under the Service
menu.
32
A190275
A190397