Carrier bryant Evolution Connex Control SYSTXBBECC01-C Installation Instructions Manual page 10

3.2. Set Dealer Information for Series C
From the main screen, touch MENU, on the bottom of the control, then
Down (▼) button so that the SERVICE icon is shown. The SERVICE
icon allows you to upload your contact information into the Evolution
Connex Control.
• Format your contact information and logo (if applicable) using the
PC/MAC
www.MyEvolutionConnex.Bryant.com, and save it to a USB C drive.
See Dealer Logo Section for more information.
• Touch the SERVICE icon for about 10 seconds, touch DEALER
LOGO UPLOAD.
• Place the USB C into the USB C drive slot on the bottom of the
Evolution Connex Control and follow the on screen prompts.
• More detailed information can be found on HVACPartners.com under:
Products and Dashboards > Product Catalog > Residential Controls >
Systems Controls >SYSTXBBECC01-B> Documents > Marketing >
Miscellaneous>Evolution Connex Control Dealer Logo Application -
Instructions.
Desktop application
10
A240318B
available at