Carrier bryant Evolution Connex Control SYSTXBBECC01-C Installation Instructions Manual page 23

automation purposes and is NOT used to connect the system control to
the Internet.
NOTE: For more information regarding the SAM Module, reference the
latest version of the application specification entitled "SAM Remote
Access Application Specification, ASCII Protocol Information",
available on HVACpartners.com, or the System Access Module
Installation Instructions.
A13117
5.6. Searching for Zones (If Applicable)
"Zoning - Searching" will appear on the screen to determine if any zones
are present. The screen will show Zone 1, Zone 2, etc. and indicate all
zones having either a Remote Room Sensor, or smart sensors associated
with them. If the system contains smart sensors, they must be assigned a
zone number before continuing. See the Smart Sensor Installation
Instructions on how to assign Smart Sensors to their respective zones.
After each zone has been identified, touch NEXT.
23