Carrier bryant Evolution Connex Control SYSTXBBECC01-C Installation Instructions Manual page 42

Shutdown: This setup option selects the change of state required for
shutdown. Select Normally Open or Normally Closed, and then save
your selection.
6.3.3.10. Furnace G Terminal Alert Label
Once the G Terminal Alert label has been entered, it is shown both on the
main screen and in the notification email when the alert becomes active.
A170248
6.3.4. AC/Heat Pump
First touch SETUP, then touch AC/HEAT PUMP to set up the
parameters for the AC/Heat Pump unit.
A14227A_2
6.3.4.1. Latching
High Cool Latch
42