Universal Robots UR3e PolyScope X User Manual page 82

9. Cybersecurity Threat Assessment
Description
9.1. General Cybersecurity
Description
9.2. Cybersecurity Requirements
Description
UR3e PolyScope X
This section provides information to help you strengthen the robot against potential
cybersecurity threats. It outlines requirements for addressing cybersecurity threats and
provides security hardening guidelines.
Connecting a Universal Robots robot to a network can introduce cybersecurity risks.
These risks can be mitigated by using qualified personnel and implementing specific
measures for protecting the robot's cybersecurity.
Implementing cybersecurity measures requires conducting a cybersecurity threat
assessment.
The purpose is to:
•
Identify threats
•
Define trust zones and conduits
•
Specify the requirements of each component in the application
WARNING
Failure to conduct a cybersecurity risk assessment can place the
robot at risk.
• The integrator or competent, qualified personnel shall conduct
a cybersecurity risk assessment.
NOTICE
Only competent, qualified personnel shall be responsible for
determining the need for specific cybersecurity measures and for
providing the required cybersecurity measures.
Configuring your network and securing your robot requires you to implement the threat
measures for cybersecurity.
Follow all the requirements before you start configure your network, then verify the
robot setup is secure.
9. Cybersecurity Threat Assessment
82 User Manual