Cisco C1131X-8PLTEPW Series Hardware Installation Manual page 31

Prepare for Router Installation
Before you install the Cisco 1000 Series Integrated Services Routers, you must prepare your site for the
installation. This chapter provides pre-installation information, such as recommendations and requirements
that should be considered before installing your router.
See the following sections to prepare for installation:
•
•
•
•
•
•
•
Safety Recommendations
Warning
Warning
Safety Recommendations, on page 25
General Site Requirements, on page 26
Rack Requirements, on page 27
Safety Recommendations, on page 28
Power Guidelines and Requirements, on page 28
Network Cabling Specifications, on page 29
Required Tools and Equipment for Installation and Maintenance, on page 31
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work
on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard
practices for preventing accidents. Use the statement number provided at the end of each warning to locate
its translation in the translated safety warnings that accompanied this device. Statement 1071
SAVE THESE INSTRUCTIONS
Ultimate disposal of this product should be handled according to all national laws and regulations. Statement
1040.
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
2
C H A P T E R
25