Cisco C1131X-8PLTEPW Series Hardware Installation Manual page 30

Slots and Interfaces
• Maximum output power: Up to 66W for non-PoE supply and upto 150W for PoE supply
• Optional PoE and PoE+
• Output voltage: +12VDC for system power and -53.5VDC for PoE power
Slots and Interfaces
About Slots, Subslots, and Port Numbering
The Cisco 1100 series designates its interfaces using a 3-tuple notation that lists the slot, sub slot and port in
the format slot/sub-slot/port. The slot number is reserved for the mother board, which is "0". Each interface
type is allocated a sub slot and the port number is a unique port on the interface.
Table 7: Slot, Bay, and Port Numbering
Subslot
0
1
2
3
4
Specifications of Cisco 1000 Series Integrated Services Routers
For specifications on the Cisco 1000 Series Integrated Services Routers, refer to the
Specifications
Periodic Inspection and Cleaning
We recommend that you periodically inspect and clean the external surface of the router. Removing is
recommended to minimize the negative impact of environmental dust or debris. The frequency of inspection
and cleaning is dependent upon the severity of the environmental conditions, but we recommend cleaning the
router once every six months. Cleaning involves vacuuming router air intake and exhaust vents.
Note
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
24
Interface Type
Ethernet LAN
Ethernet WAN
LTE
DSL
Wi-Fi
document.
Sites with ambient temperatures consistently above 25°C or 77°F and with potentially high levels of dust or
debris might require periodic preventative maintenance cleaning.
Overview of Cisco 1000 Series Integrated Services Routers
Cisco 1100 Series ISR