Cisco C1131X-8PLTEPW Series Hardware Installation Manual page 11

Overview of Cisco 1000 Series Integrated Services Routers
Note
Note
For more information on the features and specifications of Cisco 1000 Series Integrated Services Routers,
refer to the
Integrated Services Routers
Chassis Views
Note
This section contains front and back panel views of the Cisco 1000 Series Integrated Services Routers showing
locations of the power and signal interfaces, interface slots, status indicators, and chassis identification labels.
Figure 1: C111x Series - Bezel View
1
3
5
7
P-5GS6-GL is supported on C8300, C8200, C8200L, and Cisco 1000 Series Integrated Service Routers.
P-5GS6-GL is supported on Cisco 1000 Series Integrated Service Routers from the Cisco IOS XE 17.9.2
release.
Base Models with an 'X' has 8GB of DRAM and Flash memory. Example: C1111X-8P
The C1131 models have 4GB of DRAM and 8G flash memory.
The C1131X models have 8GB of DRAM and 16G flash memory.
For the C1131 series, only the Class A statements in the Trademark notice, which is available at the beginning
of this guide, is valid.
Base Models without an 'X' have 4GB of DRAM and Flash Memory. Example: C1111-8P
For base model-C11x1X-8PLTEP, 'x' represents the CPU performance level.
Cisco 1000 Series Integrated Services Routers Solution Overview
datasheet.
The compliance label is present at the bottom of the product.
Status
Wi-Fi
LTE signal intensity
Illuminated Cisco logo
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
document and
2 VPN
4 GPS
6 LTE data/SIM
Chassis Views
Cisco 1000 Series
5