Equipment Description - Kemppi X5 FastMig Operating Manual

1.1 Equipment description

X5 FastMig has several power source and wire feeder options to choose from. The control panel is always fixed to the
wire feeder.
X5 FastMig supports welding cable calibration without an additional voltage sensing cable.
By default, the X5 FastMig power sources come with a standard set of welding programs (work pack) that are available
with 1-MIG and pulse processes as applicable. The equipment technical data and welding programs included in the X5
FastMig work packs are shown here: "Technical data" on page 150 and "Welding program work packs" on page 173.
X5 power sources (400 A):
• X5 Power Source 400
>> Standard power source with support for automatic 1-MIG process as well as MAX Speed and MAX Cool processes
• X5 Power Source 400 MV
>> Multi-voltage power source with support for automatic 1-MIG process as well as MAX Speed and MAX Cool processes
• X5 Power Source 400 Pulse
>> Pulse power source with support for automatic 1-MIG process as well as all MAX processes
• X5 Power Source 400 Pulse+
>> Pulse power source with support for automatic 1-MIG process as well as all Wise and MAX processes
• X5 Power Source 400 MV Pulse+
>> Multi-voltage pulse power source with support for automatic 1-MIG process as well as all Wise and MAX processes.
For the power source part descriptions, refer to "X5 Power Source 400 and 500" on page 11.
X5 power sources (500 A):
• X5 Power Source 500
>> Standard power source with support for automatic 1-MIG process as well as MAX Speed and MAX Cool processes
• X5 Power Source 500 Pulse
>> Pulse power source with support for automatic 1-MIG process as well as all MAX processes
• X5 Power Source 500 Pulse+
>> Pulse power source with support for automatic 1-MIG process as well as all Wise and MAX processes.
For the power source part descriptions, refer to "X5 Power Source 400 and 500" on page 11.
X5 wire feeders (Manual):
• X5 Wire Feeder 200 Manual
>> Includes 2-knob membrane control panel (Manual control panel)
>> Maximum wire spool diameter 200 mm
>> Stackable with X5 power source only when the additional steel pipe frame is used
>> Optional model version with built-in rotameter for gas available.
• X5 Wire Feeder 300 Manual
>> Includes 2-knob membrane control panel (Manual control panel)
>> Maximum wire spool diameter 300 mm
>> Includes subfeeder support.
For the X5 Wire Feeder 200 part descriptions, refer to "X5 Wire Feeder 200" on page 13, "Wire spool and hub (200)" on
page 14 and "Wire feed mechanism" on page 20.
For the X5 Wire Feeder 300 part descriptions, refer to "X5 Wire Feeder 300" on page 17, "Wire spools and hubs (300)" on
page 19 and "Wire feed mechanism" on page 20.
For the control panel descriptions, refer to "Manual control panel" on page 16 (WF 200) and "Manual control panel" on
page 26 (WF 300).
© Kemppi
7
X5 FastMig
Operating manual - EN
1920960 / 2440