Advertisement
The active WPS can be deactivated by selecting 'Stop using' in the WPS's weld pass actions menu.
More feature descriptions here:
>> "Digital Welding Procedure Specification (dWPS)" on page 127
>> "WeldEye ArcVision" on page 128
3.3.5 AP/APC control panel: Welding parameters
The Welding parameters view includes a start and stop curve for visualizing and adjusting the most essential parameters
for a weld. The bottom section of the view lists the available adjustments for the selected welding process. The welding
process selection is based on the active memory channel and its settings.
Many of the welding parameters are welding process specific and are visible and available for adjustment accord-
ingly.
© Kemppi
106
X5 FastMig
Operating manual - EN
1920960 / 2440
Advertisement
Need help?
Do you have a question about the X5 FastMig and is the answer not in the manual?