Notes On Ce Marking; Intended Use; Proper Environment - MICRO-EPSILON IF2035-PROFINET Operating Instructions Manual

Safety
1.3

Notes on CE Marking

CE marking
- Directive 2014/30/EU
- Directive 2011/65/EU
Products which carry the CE marking satisfy the requirements
of the EU Directives cited and the relevant applicable harmo-
nized European standards (EN). The product is designed for
use in industrial environments.
The EU Declaration of Conformity and the technical documen-
tation are available to the responsible authorities according to
the EU Directives.
1.4

Intended Use

- The IF2035-PROFINET interface module is designed for use in industrial applications.
It is used to convert the internal MICRO-EPSILON sensor protocol (RS485, RS422) to PROFINET.
- The IF2035-PROFINET must only be operated within the limits specified in the technical data, see
- The IF2035-PROFINET must be used in such a way that no persons are endangered or machines and other material goods are
damaged in the event of malfunction or total failure.
- Take additional precautions for safety and damage prevention in case of safety-related applications.
1.5

Proper Environment

- Protection class: IP 20
- Temperature range
ƒ Operation: 0 ... +50 °C (+32 ... +122 °F)
ƒ Storage: -20 ... +70 °C (-4 ... +158 °F)
- Humidity: 5 - 95% (non-condensing)
- Ambient pressure: Atmospheric pressure
IF2035-PROFINET
UKCA marking
The following applies to the product:
- SI 2016 No. 1091:2016-11-16
- SI 2012 No. 3032:2012-12-07
Products which carry the UKCA marking satisfy the require-
ments of the directives cited and the relevant applicable
harmonized standards. The product is designed for use in
industrial environments.
The UKCA Declaration of Conformity and the technical docu-
mentation are available to the responsible authorities accord-
ing to the UKCA Directives.
Chap. 2.2.
Page 6