MICRO-EPSILON IF2035-PROFINET Operating Instructions Manual page 44

Appendix | Integration Into TIA Portal
Enter the device name for identification in the
PN network.
Switch to the Device view, dou-
ble-click your IF2035-PROFINET and
set its device name in the Inspection
window (Properties > General tab).
i
The device name is used to identify the
device on the PN network and as an
address; it must be unique across the
entire system.
The change of name must be communicated
to the PN network.
Right-click the IF2035-PROFINET.
You now reach the context menu shown.
Select the Assign device name entry.
IF2035-PROFINET
Fig. 21 Assigning a device name
Page 44