Notes On Ce Marking; Intended Use; Proper Environment - MICRO-EPSILON IF2030/ENETIP Operating Instructions Manual

Safety
1.3
The following apply to the IF2030/ENETIP interface module:
- EU Directive 2014/30/EU
- EU Directive 2011/65/EU, "RoHS" Category 9
Products which carry the CE mark satisfy the requirements of the EU directives cited and the European har-
monized standards (EN) listed therein. The measuring system is designed for use in industrial environments
and meets the requirements.
The EU Declaration of Conformity is available to the responsible authorities according to EU Directive,
article 10.
1.4
- The IF2030/ENETIP interface module is designed for use in industrial and laboratory applications. It is
- The IF2030/ENETIP must only be operated within the limits specified in the technical data, see Chap. 2.2.
- The IF2030/ENETIP must be used in such a way that no persons are endangered or machines and other
- Take additional precautions for safety and damage prevention in case of safety-related applications.
1.5
- Protection class:
- Temperature range
- Humidity:
- Ambient pressure:
IF2030/ENETIP

Notes on CE Marking

1

Intended Use

used to convert the internal MICRO-EPSILON sensor protocol (RS485, RS422) to EtherNet/IP .
material goods are damaged in the event of malfunction or total failure.

Proper Environment

IP20
ƒ Operation: 0 ... +50 °C (+32 ... +122 °F)
ƒ Storage: -20 ... +70 °C (-4 ... +158 °F)
5 - 95% (non-condensing)
Atmospheric pressure
Page 6