Server Technology PRO2 Switched POPS STV-6542 User Manual page 72

Configuring Outlet Power Factor Thresholds
Click the outlet power factor thresholds link at the bottom of the Outlets page to display the configuration page:
To set outlet power factor thresholds:
1. Provide a numeric value for the threshold hysteresis between event state and recovery. Range is 0.0-0.20;
default is 0.02.
2. Set numeric values for the low alarm/warning outlet power factor thresholds. Range is min 0.00; max is
1.00.
3. Click Apply.
Using the Web Interface
Switched PRO2 – User Guide
•
72