Set Banner; Set Bluetooth - Server Technology PRO2 Switched POPS STV-6542 User Manual

Command Access
Admin level only

set banner

Sets the system banner that displays before a user authenticates a user session.
Command Syntax
set banner <banner text>
Parameters
The set banner command uses the following sub-parameters:
Usage Guidelines
• The banner accepts all printable ASCII characters, plus CRLF.
• CTL-Z terminates banner input.
Command Access
Admin level only; no access in Demo mode

set bluetooth

Sets Bluetooth
Command Syntax
set bluetooth [disabled | enabled]
set bluetooth discover [disabled | enabled | limited]
set bluetooth name <name>
set bluetooth pincode <value>
set bluetooth transpwr <value>
Parameters
The set bluetooth command uses the following parameters:
Sub-Parameters
The set bluetooth command uses the following sub-parameter:
Command Access
Admin level only; no access in Demo mode.
Using the Command Line Interface (CLI)
banner text Text for system banner, 0-2070 characters.
configuration values.
®
discover Sets the discoverability of the Bluetooth module.
name Sets the name of the Bluetooth module (1-31 characters).
pincode Sets the pin code used for Bluetooth pairing (0000-9999).
transpwr Sets the transmission power for Bluetooth communications.
limited The Bluetooth module will be discoverable to 60-seconds after the
module button has been pressed.
Switched PRO2 – User Guide
•
153