Server Technology PRO2 Switched POPS STV-6542 User Manual page 154

set branch
Sets branch configuration values.
Command Syntax
set branch email [disabled | enabled] <name | id | ALL>
set branch load [alarmhi | alarmlo | warnhi | warnlow] <name | id | ALL> <value>
set branch load hyst <value>
set branch snmpt [disabled | enabled] <name | id | ALL>
Parameters
The set branch command uses the following parameters:
Sub Parameters
The set branch command uses the following sub-parameters:
Usage Guidelines
min <= alarmlo <= warnlo <= warnhi <= alarmhi <= max
Command Access
Admin level only
Using the Command Line Interface (CLI)
email Email notifications for branch events.
hyst Hysteresis between event state and recovery (0.0 to 10.0).
load Current load for a branch.
min=0A; max (max current) in show branches command; hyst=0.0-10.0A;
default-1.0A.
snmpt SNMP trap notifications for branch events.
alarmhi High alarm value.
alarmlo Low alarm value.
warnhi High warning alarm.
warnlo Low warning alarm.
Switched PRO2 – User Guide
•
154