User Access Rights - Server Technology PRO2 Switched POPS STV-6542 User Manual

User Access Rights

The following table defines the user rights granted by the administrative user for access to PRO2 operations using
either the Web GUI or the Command Line interface (CLI). Only the options for which the user has access rights will
be available in the firmware for the user.
User Access Level Description
(highest to lowest)
Administrator Administrative user; full access for all configuration, user management, all outlet power control
actions (On, Off, Reboot), status, and serial/pass-thru ports.
Power User Full access for all outlet power control actions (On, Off, Reboot), status, and serial/pass-thru
ports.
User Partial access for outlet power control actions (On, Off, Reboot), status, and pass-thru of
assigned outlets, outlet groups, and serial/pass-thru ports.
Reboot-Only User Partial access for outlet power control actions (Reboot), status, and pass-thru of assigned
outlets, outlet groups, and serial/pass-thru ports.
On-Only User Partial access for outlet power control actions (On), status, and pass-thru of assigned outlets,
outlet groups, and serial/pass-thru ports.
View-Only User Partial access for status and pass-thru of assigned outlets, outlet groups, and serial/pass-thru
ports.
The administrative user can also grant administrative-level rights to other user accounts, allowing the PRO2 unit to
have more than one administrative user.
Administrative access rights cannot be removed from the default admn user account until an administrative user
grants administrative access rights to another user account.
To use administrative commands, the user must be granted administrative user access rights.
Getting Started with the Firmware
Note: The Power User does not have access to user management.
Switched PRO2 – User Guide
•
22