Uploading Files; File View - Server Technology PRO2 Switched POPS STV-6542 User Manual

System > Files

The Files page

provides a separate embedded file system to give quick access to system configuration files directly from the

PRO2 GUI page, as well as the on-board and downloadable Sentry4-MIB and OID Tree for the PRO2, eliminating website

MIB/OID downloads.

Note: CDU products continue to use the current Sentry3-MIB. The new Sentry4-MIB and its new OID tree are designed

exclusively for the PRO2

The page also allows GUI-based file uploads (without FTP) for system, configuration, and firmware versions. However, all PRO2

configuration/system files, MIB, and OID Tree can also be accessed via FTP at Configuration > Network > FTP.

Note: There is no CLI equivalent function for the GUI Configuration > System > Files page.

Uploading Files

Simple file upload without the need for FTP. Upload a firmware version or specific system configuration file by

browsing and selecting the file in the Upload File field, and clicking Upload. A confirmation message displays to

indicate the upload was successful and the system will require a restart.

The File View section of the page is a list of displayed files showing date/time stamp, file name, and file size.

Several file types are shown in the list, described on the following pages:

Using the Web Interface

products.

Switched PRO2 – User Guide

•

Table of Contents

Do you have a question about the PRO2 Switched POPS STV-6542 and is the answer not in the manual?