Server Technology PRO2 Switched POPS STV-6542 User Manual page 168

Parameters
The set outlet command uses the following sub-parameters:
min <= alarmlo <= warnlo <= warnhi <= alarmhi <= max
Command Access
Admin level only
Using the Command Line Interface (CLI)
script delay Sets the time to wait after the script has executed to outlet state
change. 1-15 seconds.
Sets the time to wait after the shutdown notification to host before outlet
shutdown delay
state change. Valid range is 1-900 seconds.
on Sets outlet to sequence on after system boot.
off Sets outlet to remain off after system boot.
last Sets outlet to match its last state prior to system boot after system boot.
alarmhi Sets high alarm value.
alarmlo Sets low alarm value.
warnhi Sets high warning value.
warnlo Sets low warning value.
Switched PRO2 – User Guide
•
168