Server Technology PRO2 Switched POPS STV-6542 User Manual page 174

set sntp
Sets SNTP configuration values.
Command Syntax
set sntp dst [disabled | enabled]
set sntp dst [end | start] <tz string>
set sntp gmtoffset <offset>
set sntp primary <hostname>
set sntp secondary <hostname>
Parameters
The set sntp command uses the following parameters:
Sub-Parameters
The set sntp command uses the following sub-parameters:
Command Access
Admin level only; no access in Demo mode
set spm
Sets Sentry Power Manager (SPM) access configuration values.
Command Syntax
set spm [disabled | enabled]
set spm resetpw
Parameters
The set spm command uses the following parameter:
Command Access
Admin level only; no access in Demo mode
Using the Command Line Interface (CLI)
dst Sets to automatically adjust for Daylight Saving Time (DST).
gmtoffset Sets the adjustment from Coordinated Universal Time (UTC).
(-12 to 14). GMT Offset includes both extended hours and minutes.
primary Sets the first SNTP server. 0-63 characters.
secondary Sets the second SNTP server. 0-63 characters.
end Date to end DST.
start Date to start DST.
resetpw Sets to reset SPM secure password back to default.
Switched PRO2 – User Guide
•
174