Server Technology PRO2 Switched POPS STV-6542 User Manual page 162

Sub-Parameters
The set ldap command uses the following sub-parameters:
Command Access
Admin level only; no access in Demo mode
set ldapgroup
Sets configuration values for LDAP group access rights.
Command Syntax
set ldapgroup access [admin }| admin | ononly | poweruser | rebootonly | user |
set ldapgroup sysmon [disabled | enabled] <groupname>
Parameters
The set ldap group command uses the following parameters:
Sub-Parameters
The set ldap group command uses the following sub-parameter:
Command Access
Admin level only
Using the Command Line Interface (CLI)
hostname Sets the hostname of the Directory Services server.
port Sets the port number for the LDAP server. 1-65535 (default 389).
userbasedn Sets the base distinguished name (DN) for the username search at
login.
userfilter Sets the filter used for the username search at login.
simple Uses simple bind method.
tls Uses bind with TLS. (TLS version 1).
md5 Uses Digest MD5 bind.
basedn Base Distinguished Name (DN).
useattr Sets the user attribute to search for.
viewonly] <groupname>
access Sets the access type of an LDAP group.
Note: On-Only, Reboot-Only, and View-Only are available for Switched
PRO2 products.
sysmon Sets system monitor access for an LDAP group.
groupname Name of the LDAP group to change access rights. 0-32 characters.
Switched PRO2 – User Guide
•
162