Remove Group; Remove Ldapgroup - Server Technology PRO2 Switched POPS STV-6542 User Manual

pstat
Displays the latest status and metrics for all phases in the system.
Command Syntax
pstat
Command Access
System monitor access
reboot
Turns off the specified outlet or outlet group and then turns it back on after a delay.
Command Syntax
reboot <name | id | group | ALL>
Usage Guidelines
The Reboot command is for Switched PRO2 products only.
Command Access
Reboot-Only users or User level and above

remove group

Removes an outlet group from the system.
Command Syntax
remove group <name>
Command Access
Admin level only

remove ldapgroup

Removes an LDAP group from the system.
Command Syntax
remove ldapgroup <name>
Command Access
Admin level only
remove ups
Removes an uninterruptable power supply (UPS) from the system.
Command Syntax
remove ups <name>
Command Access
Admin level only
Using the Command Line Interface (CLI)
Switched PRO2 – User Guide
•
150