Advertisement
View-Only user with environmental monitoring allowed and all outlet and group access rights:
sti-view Auth-Type := Local, User-Password == "view"
STI-Access-Level = View-Only,
STI-Env-Mon = Yes,
STI-Outlets = "ALL",
STI-Outlets = "ALL"
Network > SNMP
The SNMP page provides the protocol and agent configuration options for SNMP support.
About SNMP Versions
The firmware supports SNMP v1, v2c, and v3.
•
•
SNMP version 3 supports authentication and encryption on a per user basis. Authentication types are None
and MD5. Encryption types are None and DES. If you use authentication, you must use encryption.
•
Two SNMPv3 users are supported: one user with read-write (RW) access, and one user with read-Only
(RO) access Both users have the same configuration parameters, and you can configure each user
independently.
SNMPv2c and SNMPv3 can be enabled or disabled independently. You can have SNMPv2 and/or
•
SNMPv3, or none.
Using the Web Interface
Switched PRO2 – User Guide
•
103
Advertisement
Need help?
Do you have a question about the PRO2 Switched POPS STV-6542 and is the answer not in the manual?