System Board - HP xw3100 Service And Technical Reference Manual

5.13 System Board

1. Prepare the workstation for disassembly (Section 5.1).
2. Remove the workstation access panel (Section 5.5).
3. Remove all PCI expansion boards (Section 5.9).
4. Remove the AGP graphics card (Section 5.9).
5. Disconnect all cables connected to the system board, noting their location for reinstallation.
6. Compress the system board tray handle 1 to release the latch and slide the system board tray
towards the front of the workstation 2 to free it from the back of the chassis.
To install the system board with its tray, reverse the removal procedures.
Service and Technical Reference Guide, xw3100
Removal and Replacement Procedures
338611-001 5–25