HP xw3100 Service And Technical Reference Manual page 19

Heading Option
Security Device Security*
(continued)
Network Service
Boot
System IDs
*Option supported on select models.
Service and Technical Reference Guide, xw3100
Enables/disables serial ports A and B, parallel port, front USB
ports, all USB ports, system audio, and network controllers
(some models).
Enables/disables the workstation's ability to boot from an
operating system installed on a network server. (Feature
available on NIC models only; the network controller must
reside on the PCI bus or be embedded on the system board.)
Allows you to set:
• Asset tag (18-byte identifier) and ownership Tag (80-byte
identifier displayed during POST).
See Chapter 3, Desktop Management, in this Guide.
• Chassis serial number or Universal Unique Identifier (UUID)
number. The UUID can only be updated if the current
chassis serial number is invalid. (These ID numbers are
normally set in the factory and are used to uniquely identify
the system.)
Keyboard locale setting (for example, English or German) for
System ID entry.
338611-001
Computer Setup Utilities and Diagnostic Features
Description
2–9