Routine Care; General Cleaning Safety Precautions; Cleaning The Workstation Case - HP xw3100 Service And Technical Reference Manual

Identifying the Chassis, Routine Care, and Disassembly Preparation
Static awareness labels
Wrist straps and footwear straps providing one-megohm +/- 10% resistance
Material handling packages
Conductive plastic bags
Conductive plastic tubes
Conductive tote boxes
Opaque shielding bags
Transparent metallized shielding bags
Transparent shielding tubes

4.3 Routine Care

4.3.1 General Cleaning Safety Precautions

1. Never use solvents or flammable solutions to clean the workstation.
2. Never immerse any parts in water or cleaning solutions; apply any liquids to a clean cloth
and then use the cloth on the component.
3. Always unplug the workstation when cleaning with liquids or damp cloths.
4. Always unplug the workstation before cleaning the keyboard, mouse, or air vents.
5. Disconnect the keyboard before cleaning it.
6. Wear safety glasses equipped with side shields when cleaning the keyboard.

4.3.2 Cleaning the Workstation Case

Follow all safety precautions in Section
To clean the workstation case, follow the procedures described below:
To remove light stains or dirt, use plain water with a clean, lint-free cloth or swab.
For stronger stains, use a mild dishwashing liquid diluted with water. Rinse well by wiping it
with a cloth or swab dampened with clear water.
For stubborn stains, use isopropyl (rubbing) alcohol. No rinsing is needed as the alcohol will
evaporate quickly and not leave a residue.
After cleaning, always wipe the unit with a clean, lint-free cloth.
Occasionally clean the air vents on the workstation. Lint and other foreign matter can block
the vents and limit the airflow.
4–4
4.3.1 before cleaning the workstation.
338611-001 Service and Technical Reference Guide, xw3100