5.9.1 Riser Card
1. If you have locked the Smart Cover Lock, use Computer Setup to unlock the lock
(Section 5.2).
2. Prepare the workstation for disassembly (Section 5.1).
3. Remove the workstation access panel (Section 5.5).
4. Remove the expansion card cage (Section 5.9).
5. Remove the three screws that secure the riser card to the expansion card cage, then remove
the card.
To install the riser card, reverse the removal procedure.
Service and Technical Reference Guide, xw3100
Removal and Replacement Procedures
338611-001
5–11