Removal and Replacement Procedures
5.7 Front Drive Bezels
1. Prepare the workstation for disassembly (Section 5.1).
2. Remove the workstation access panel (Section 5.5).
3. Remove the front bezel (Section 5.6).
5.7.1 Diskette Drive Bezel or Bezel Blank
Press the large retaining tab 1 on the left side of the bezel insert to the left and push the cover out
of the front bezel 2.
To install a bezel or a bezel blank, reverse the removal procedure.
5–8
338611-001
Service and Technical Reference Guide, xw3100