Smart Cover Sensor (Optional) - HP xw3100 Service And Technical Reference Manual

Desktop Management

3.5 Smart Cover Sensor (Optional)

Smart Cover Sensor is a combination of hardware and software technology that can alert you
when the workstation cover or side panel has been removed. There are three levels of protection,
as described in the following table.
Smart Cover Sensor Protection Levels
Level
Level 0
Level 1
Level 2
These settings can be changed using Computer Setup.
Setting the Smart Cover Sensor Protection Level
To set the Smart Cover Sensor protection level, complete the following steps:
1. Turn on or restart the workstation. If you are in Windows, click Start > Shut Down >
Restart the Computer.
F10
2. Press the
screen, if necessary.
If you do not press the
on again, and press the
3. Select Security, then Smart Cover, and follow the instructions on the screen.
4. Before exiting, click File > Save Changes and Exit.
Smart Cover Lock (Optional)
The Smart Cover Lock is a software-controllable cover lock featured on select HP workstations.
This lock prevents unauthorized access to the internal components. Workstations ship with the
Smart Cover Lock in the unlocked position.
Ä
CAUTION: For maximum cover lock security, be sure to establish a setup password. The setup password
prevents unauthorized access to the Computer Setup utility.
3–16
Setting
Disabled
Notify User
Setup Password
key as soon as the monitor light turns green. Press
F10
key at the appropriate time, you must turn the workstation off, then
F10
key again to access the utility.
338611-001
Description
Smart Cover Sensor is disabled (default).
When the workstation is restarted, the
screen displays a message indicating that
the workstation cover or side panel has
been removed.
When the workstation is restarted, the
screen displays a message indicating that
the workstation cover or side panel has
been removed. You must enter the setup
password to continue.
Enter
to bypass the title
Service and Technical Reference Guide, xw3100