Completing The Installation Of A Drive - HP Kayak XA User Manual

crystal.bk : cryst-2.fb4 Page 49 Monday, March 23, 1998 4:09 AM
When an IDE CD-ROM
Drive Is Installed
When a Flexible Disk
Drive Is Installed
10 Remove the plastic panel from the cover by pulling the panel from
the left and unhinging its right-hand side. Store the panel in a safe
place.
11 Install any other accessories before replacing the cover and
completing the installation.

Completing the Installation of a Drive

1 Switch on the computer and press
2 In the Setup program, select the Advanced menu, the IDE Devices
submenu. Check that the CD-ROM drive has been detected on the
IDE channel.
3 Press to save and exit the program.
1 Switch on the computer and press
2 In the Setup program, select the Advanced menu, the Flexible Disk
Drives submenu, and check that the drive has been detected.
3 Press to save and exit the program.
2 How to Install Accessories Inside Your PC Workstation
Installing Mass Storage Devices
Unclip and lift out
the plastic panel
when
when
appears.
Setup
appears.
Setup
English 49