HP Kayak XA User Manual page 64

crystal.bk : cryst-2.fb4 Page 48 Monday, March 23, 1998 4:09 AM
Wide SCSI devices should be
connected to a free SCSI connector
on the SCSI cable (you can add up
to five SCSI devices).
IDE drives should be connected to a
free IDE connector on the IDE cable
(you can add up to two IDE devices).
Up to 13 external SCSI devices can be
connected via the external SCSI
connector.
2 How to Install Accessories Inside Your PC Workstation
Installing Mass Storage Devices
7 Locate the appropriate data cable for the device.
8 Connect the data and power cables to the rear of the device. (The
connectors are shaped to go in one way only.)
Data Cable
9 Slide the power supply back into position, and tighten the four self-
retaining screws (see page 30).
48 English
Narrow SCSI devices should be
connected to a free SCSI connector on
the SCSI cable (you can add up to two
SCSI devices).
Power Cable