Unpacking Your Pc Workstation - HP Kayak XA User Manual

crystal.bk : cryst-1.fb4 Page 2 Monday, March 23, 1998 4:09 AM
WARNING
NOTE
Installation Tools
1 Setting Up and Using Your PC Workstation

Unpacking Your PC Workstation

Unpacking Your PC Workstation
If you are in any doubt that you can lift the PC Workstation and the
display safely, do not try to move them without help.
1 When you receive your PC Workstation, unpack all of the
components:
Computer and power cords
•
Display and its video cable
•
HP enhanced keyboard, mouse, and headphones
•
Manuals and driver kit.
•
Device drivers, HP utilities, and an online Network Administrator Guide
are preloaded on your system and provided in a driver kit.
2 Place the PC Workstation on (or under) a sturdy desk with easily
accessible power outlets and enough space for the keyboard, mouse,
and any other accessories.
3 Position the PC Workstation so that its rear connectors are easily
accessible.
4 Place the display next to the computer.
No tools are required to install your PC Workstation. However, if you
plan to install a disk drive or an accessory board inside your
PC Workstation, you will need a flat-blade screwdriver. For more
information on installing accessories, refer to "How to Install
Accessories Inside Your PC Workstation", on page 23.
2 English