Connecting To A Network - HP Kayak XA User Manual

crystal.bk : cryst-1.fb4 Page 4 Monday, March 23, 1998 4:09 AM
1 Setting Up and Using Your PC Workstation

Connecting to a Network

Connecting to a Network
Your PC Workstation has a 10BT/100TX LAN interface adapter.
The LAN adapter supports both 10 Mbit/s and 100 Mbit/s operations
and automatically detects which network type is being used.
1 Connect the RJ-45 plug on your network cable to the LAN connector
on the LAN Adapter. Push the plug into the connector until the plug
clicks into place.
2 Attach the other end of the LAN cable to a hub (or into a wall socket
that is connected to a hub).
Let your Network Administrator know that you are connecting your
PC Workstation to the network.
For further instructions on configuring your network connection,
refer to "Configuring Your Network Connection" on page 103.
Refer also to the online Network Administrator's Guide
(preloaded onto your PC Workstation) for further instructions on
setting up your PC Workstation for a LAN connection.
4 English
The board shown here is
a combined SCSI/LAN
board.