Managing An Existing Array; Making The Array Bootable; Displaying Array Information - HP Kayak XA User Manual

crystal.bk : cryst-4.fb4 Page 128 Monday, March 23, 1998 4:09 AM
NOTE
4 Technical Information
Using the ArrayConfig Program

Managing an Existing Array

You can manage an existing array in the following ways:
Making a bootable array
•

Displaying array information

•
Deleting an array
•
Initializing an array
•
Adding or deleting a spare disks
•

Making the Array Bootable

Follow these steps if you want your computer to boot from the newly
created array or if you want to change the boot order of existing arrays:
1 Select
Display Boot Order
Singles and Arrays window appears.
2 If the newly created array is listed as Unit 0 at the top of the list, no
changes are necessary; if it has some other unit number, highlight
the array name and press
3 Use the arrow keys to move the selected array to the top of the list.
Then press
4 When you are finished, press
You cannot use this procedure to change the boot order of a non-striped
SCSI disk drive (see the "Resolving Problems" on page 134 for notes on
booting from the Narrow SCSI BIOS). If you want to do this, create a
one-drive RAID 0 "array" from the disk.
Displaying Array Information
Follow these steps to display information about existing arrays defined
in your computer:
1 Select
Disk Array Operations
2 Select from the Disk Array Operations menu.
Display Arrays
128 English
from the Main Menu. The Boot Order for
to select it.
to deselect it.
to return to the Main Menu.
from the Custom Setup Main Menu.