Installing Accessory Boards; Installing The Board - HP Kayak XA User Manual

Hp kayak xa: user guide
Hide thumbs Also See for Kayak XA:
Table of Contents

Advertisement

crystal.bk : cryst-2.fb4 Page 50 Monday, March 23, 1998 4:09 AM
CAUTION
NOTE
2 How to Install Accessories Inside Your PC Workstation

Installing Accessory Boards

Installing Accessory Boards
Static electricity can damage electronic components. Turn OFF all
equipment. Don't let your clothes touch the accessory. To equalize the
static electricity, rest the accessory bag on top of the computer while
you are removing the accessory from the bag. Handle the accessory as
little as possible and with care.
The PC Workstation has the following accessory board slots:
Slot AT 2 (the bottom slot) for full-length 16-bit ISA boards
Slot AT 1/PCI 4 for either a 16-bit ISA board or a full-length 32-bit
PCI board
Slot PCI 3 can be used for a full-length 32-bit PCI board (and also
features the RAIDport
Slot PCI 2 for a full-length 32-bit PCI board
Slot PCI 1 for a full-length 32-bit PCI board
Slot AGP for the video adapter board

Installing the Board

1 Disconnect the computer's power cord and any LAN connection or
telecommunications cable.
PCI boards are configured automatically when installed in the
PC Workstation.
2 Remove the computer's cover ( "Removing and Replacing the Cover",
on page 25) and carefully place the PC Workstation on its side.
3 Find an empty slot. refer to "System Connectors and Switches", on
page 96. to identify the location of the slot type you want to use
(ISA or PCI).
Some boards may have preferred locations and special installation
instructions detailed in their manuals.
50
English
connector)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents