Completing The Installation Of A Hard Disk Drive - HP Vectra XU6 User Manual

When a SCSI Drive
is Installed
When an IDE Drive
is Installed
NOTE
3 How to Install Accessories Inside Your PC
Installing Disk Drives

Completing the Installation of a Hard Disk Drive

1 Switch on the computer.
2 When the SCSI BIOS initialization messages are displayed, check
that the details for the new SCSI drive have been correctly detected.
Refer to the operating system documentation for information on
formatting a drive.
1 Switch on the computer.
2 When an error message appears, follow the instructions provided by
the Error Message Utility. When prompted, press
Setup program.
3 In the
IDE Primary Channel
section, check that the details for
been correctly detected by the Setup program.
4 Press to save and exit Setup.
Refer to the operating system documentation for information on
formatting a drive.
If an IDE drive is removed, switch on the computer and follow the
instructions displayed by the Error Message Utility. When prompted,
press to run the Setup program and select
missing drive.
62 English
(or
IDE Secondary Channel
(or
Device 1 Device 2
None or SCSI
to run the
)
) have
for the