Completing The Installation Of A Hard Disk Drive - HP Vectra VT6 User Manual

When an IDE Drive
is Installed
NOTE

Completing the Installation of a Hard Disk Drive

1 Switch on the computer.
2 When an error message appears, follow the instructions provided by
the Error Message Utility. When prompted, press
Setup program.
3 In the
IDE Primary Channel
section, check that the details for
been correctly detected by the Setup program.
4 Press to save and exit Setup.
Refer to the operating system documentation for information on
formatting a drive.
If an IDE drive is removed, switch on the computer and follow the
instructions displayed by the Error Message Utility. When prompted,
press to run the Setup program and select
missing drive.
3 How to Install Accessories Inside Your PC
(or
IDE Secondary Channel
(or
Device 1 Device 2
None or SCSI
Installing Disk Drives
to run the
)
) have
for the
English 69